Experts In Toxic Gas Detection
Monitors Available By Gas Name

Home   Page 1   Page 2   Page 3   NEW   Contact Us   About CEA   Table of Contents

Click here to go back and find ~~~> MONITORS AVAILABLE BY GAS NAME

E-mail us for more information: sales@ceainstruments.com


FORMALDEHYDE (HCHO)
*Can only be used for large leaks and very high level applications!*

Portable Units

SERIES U - Ranges of 0-10 ppm to 0-1000 ppm - Unique, patented sensors are utilized that are unaffected by moisture, temperature change, or poisons. Units are available for many different common or exotic gases in low levels for leaks or in very high measuring ranges that most or no other gas monitors can handle. All units are equipped with adjustable audio/visual alarms. The portable version has the sensor attached to the end of a probe connected by cable to controller unit with choice of analog or digital display. There is no built-in air pump or internal datalogger option. This Formaldehyde sensor uses solid state detection that will also respond to many different alcohols and hydrocarbons (if present) and is only available with a range of 0-10 ppm or higher for large leaks.

  

Wall Mounted Units

SERIES U - Ranges of 0-10 ppm to 0-1000 ppm - Unique, patented sensors are utilized that are unaffected by moisture, temperature change, or poisons. Units are available for many different common or exotic gases in low levels for leaks or in very high measuring ranges that most or no other gas monitors can handle. All units are equipped with adjustable audio/visual alarms. The wall mounted versions have a contact relay as standard and are available in single or multi-channel configurations. The electrical classification of the remote sensors is explosion proof under Class 1, Division 1, Groups B, C, and D hazardous atmospheric areas and can be wired up to 2000 feet away. Recorder outputs and dual alarms are available. This Formaldehyde sensor uses solid state detection that will also respond to many different alcohols and hydrocarbons (if present) and is only available with a range of 0-10 ppm or higher for large leaks.

CEA 420 SERIES - Ranges of 0-10 ppm to 0-1000 ppm - The same exact, patented sensors as in the Series U are used but in the explosion proof housing is a built-in amplifier/transmitter. These stand alone units only need 12 VDC, 24 VDC, or AC power and will continuously transmit a linear 4-20 mA signal to any existing controllers or PLC that can interpret these signals. Digital display is the only available option since there are no alarms, relays, or other types of outputs available with these units. This Formaldehyde sensor uses solid state detection that will also respond to many different alcohols and hydrocarbons (if present) and is only available with a range of 0-10 ppm or higher for large leaks.


Click here to go back and find ~~~> MONITORS AVAILABLE BY GAS NAME

Home   Page 1   Page 2   Page 3   NEW   Contact Us   About CEA   Table of Contents