Experts In Toxic Gas Detection
Monitors Available By Gas Name

Home   Page 1   Page 2   Page 3   NEW   Contact Us   About CEA   Table of Contents

Click here to go back and find ~~~> MONITORS AVAILABLE BY GAS NAME

E-mail us for more information: sales@ceainstruments.com


AMMONIA (NH3)

Portable Units

TRIPLE PLUS + - Ranges of 0-50 ppm or 0-1000 ppm - Multi-gas unit that simultaneously monitors, displays, and alarms for one to four gases with many different interchangeable, 'smart' electrochemical sensors available. These units are housed in an ultra durable case that is virtually unbreakable, highly water resistant, dust proof, and RF resistant. This is the only unit that would float if dropped accidentally in water! The large digital display with backlight shows the levels of the gases and the push button menu for the advanced microprocessor's features which is password protected. There is the option of a built-in air pump, internal datalogger, and more.

GASMAN - Ranges of 0-100 ppm or 0-1000 ppm - These single gas, personal size monitors replaced the original Gasman (1991-2000) and Gasman II (2000-2009) units. This version is the lightest and lowest cost but is also the most advanced, flexible, durable, and compact! Each unit offers easy one button operation, a large backlit digital display, peak hold, IP65 & IP67 water and dust protection, with multiple levels of built-in audio, visual, and vibrating alarms including TWA in toxic versions. Replaceable batteries last up to two years in oxygen and toxic versions. Rechargeable batteries and a charger are used for combustible versions. There is no built-in air pump but each unit comes standard with a flow cap and internal event logging with optional communication software.

SERIES U - Ranges of 0-100 ppm to 0-5000 ppm - Unique, patented sensors are utilized that are unaffected by moisture, temperature change, or poisons. Units are available for many different common or exotic gases in low levels for leaks or in very high measuring ranges that most or no other gas monitors can handle. All units are equipped with adjustable audio/visual alarms. The portable version has the sensor attached to the end of a probe connected by cable to controller unit with choice of analog or digital display. There is no built-in air pump or internal datalogger option.

SB1000 & SB2000 - Ranges of 0-2% to 0-100% Volume - The new SB1000 & SB2000 are low cost, self-contained portable and wall mounted analyzers that utilize single beam infrared technology to provide high selectivity, excellent sensitivity, and repeatability. One optional internal electrochemical sensor for Oxygen, Hydrogen Sulfide, or another toxic gas in PPM levels can also be installed in any unit. These single gas analyzers then become dual gas analyzers. The resolution and accuracy is about 1% resolution of full scale for any of the sensors in these analyzers.

  

Wall Mounted Units

XGARD SERIES - Ranges of 0-50 ppm to 0-1000 ppm - The Xgard Series are remote toxic, Oxygen, and combustible gas detectors that use the latest sensor technologies and come in a variety of different types for extreme flexibility at a low price. These are the best choice for every application except that there are no Xgard types currently offered with local digital display. If you must have this option at the remote sensor itself, then you would choose the TXgard Series. All of the Xgard Series can be connected and powered by the Gasmaster Series of single and multi-channel control units which offers digital display, built-in battery back-up, continuous output signals, common and individual dual level alarms, relay contacts, and can be used with most other remote sensors that transmit a 4-20 mA signal.

TXGARD SERIES - Ranges of 0-50 ppm to 0-1000 ppm - The TXgard Series of remote toxic and Oxygen gas sensors offers a local digital display which are not available on the newer, less expensive Xgard Series. The TXgard-IS+ is Intrinsically safe and lightweight. The TXgard Series can be used with any controllers or PLC that can interpret a 4-20 mA output signal when between 10-30 VDC power is provided. All of the TXgard Series can be connected and powered by the Gasmaster Series of single and multi-channel control units which offers digital display, built-in battery back-up, continuous output signals, common and individual dual level alarms, relay contacts, and can be used with most other remote sensors that transmit a 4-20 mA signal.

SERIES U - Ranges of 0-100 ppm to 0-5000 ppm - Unique, patented sensors are utilized that are unaffected by moisture, temperature change, or poisons. Units are available for many different common or exotic gases in low levels for leaks or in very high measuring ranges that most or no other gas monitors can handle. All units are equipped with adjustable audio/visual alarms. The wall mounted versions have a contact relay as standard and are available in single or multi-channel configurations. The electrical classification of the remote sensors is explosion proof under Class 1, Division 1, Groups B, C, and D hazardous atmospheric areas and can be wired up to 2000 feet away. Recorder outputs and dual alarms are available.

CEA 420 SERIES - Ranges of 0-100 ppm to 0-5000 ppm - The same exact, patented sensors as in the Series U are used but in the explosion proof housing is a built-in amplifier/transmitter. These stand alone units only need 12 VDC, 24 VDC, or AC power and will continuously transmit a linear 4-20 mA signal to any existing controllers or PLC that can interpret these signals. Digital display is the only available option since there are no alarms, relays, or other types of outputs available with these units.

SB1000 & SB2000 - Ranges of 0-2% to 0-100% Volume - The new SB1000 & SB2000 are low cost, self-contained portable and wall mounted analyzers that utilize single beam infrared technology to provide high selectivity, excellent sensitivity, and repeatability. One optional internal electrochemical sensor for Oxygen, Hydrogen Sulfide, or another toxic gas in PPM levels can also be installed in any unit. These single gas analyzers then become dual gas analyzers. The resolution and accuracy is about 1% resolution of full scale for any of the sensors in these analyzers.

MGA 3000 - Ranges of 0-2% Volume to 0-100% Volume - Single or multiple gas analyzers that use advanced Infrared and several other field proven technologies to analyze up to four gases at once. These units with built-in air pumps can be used in hostile or friendly environments. The option to upgrade at a later time protects your initial investment. A robust, attractive, compact 3U rack mount enclosure houses the unit with an optional bench case available for non-rack mounted applications. Many different gases from low ppm to 100% Volume levels can be analyzed and monitored


Click here to go back and find ~~~> MONITORS AVAILABLE BY GAS NAME

Home   Page 1   Page 2   Page 3   NEW   Contact Us   About CEA   Table of Contents